top of page

Load data for .30 PICRA + .308 | 178gr | Remington SP Extended-Range

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.30 PICRA + .308 | 178gr | Remington SP Extended-Range

Load Specifications

Bullet:
.308 | 178gr | Remington SP Extended-Range
Bullet Weight:
178gr | 11.5g
Bullet Diameter:
0.308" | 7.82mm
Bullet Length:
1.000" | 25.4mm
Caliber:
.30 PICRA
Case Length (l3):
1.291" | 32.8mm
Cartridge Length (C.O.L.):
2.169" | 55.1mm
Seated Depth:
0.122" | 3.1mm
Shank Seated Depth:
0.122" | 3.1mm
Case Capacity:
24.2 Grains of Water | 1.57 cm³
Primer Size:
Small Pistol (SP)
Max. allowed Pressure:
40611 psi | 2800 bar
LID:
LID_B5173_C311

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 0 loads in caliber .30 PICRA with .308 | 178gr | Remington SP Extended-Range bullet and 0 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AP 100
<<locked>>
67%
35157
87%
**55
100%
Accurate 4100
<<locked>>
67%
35447
87%
**40
94%
[Accurate No. 11 FS]*
<<locked>>
76%
36042
89%
**60
88%
Alliant 2400
<<locked>>
64%
35375
87%
**43
96%
Alliant BLUE DOT
<<locked>>
67%
35012
86%
**14
100%
Hodgdon H110
<<locked>>
71%
35317
87%
**70
91%
Hodgdon LilGun
<<locked>>
71%
34722
85%
**73
96%
Hodgdon TrailBoss
<<locked>>
93%
25889
64%
**6
100%
Ramshot Enforcer
<<locked>>
64%
35491
87%
**50
97%
ReloadSwiss RS 14
<<locked>>
96%
26455
65%
**9
100%
ReloadSwiss RS 30
<<locked>>
87%
35288
87%
**89
94%
SNPE Vectan BA6 1/2
<<locked>>
89%
36506
90%
**53
99%
SNPE Vectan BA7 1/2
<<locked>>
63%
36361
90%
**25
100%
Somchem S265
<<locked>>
79%
35360
87%
**27
90%
Vihtavuori 3N38
<<locked>>
65%
36361
90%
**01
100%
Vihtavuori N105
<<locked>>
65%
34693
85%
**88
100%
Vihtavuori N110
<<locked>>
81%
36492
90%
**76
97%
Vihtavuori N32C Tin Star
<<locked>>
76%
36376
90%
**1
100%
[Winchester 296]*
<<locked>>
71%
35984
89%
**89
88%

Max Load - Barrel Length: 5.50''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AP 100
<<locked>>
61%
29428
72%
**83
100%
Accurate 4100
<<locked>>
61%
28892
71%
**45
91%
[Accurate No. 11 FS]*
<<locked>>
66%
25643
63%
**06
81%
Alliant 2400
<<locked>>
61%
32010
79%
**94
95%
Alliant BLUE DOT
<<locked>>
61%
29646
73%
**29
99%
[Hodgdon H110]*
<<locked>>
61%
25208
62%
**96
84%
Hodgdon LilGun
<<locked>>
61%
24163
59%
**09
91%
Hodgdon TrailBoss
<<locked>>
61%
14794
36%
**2
100%
Ramshot Enforcer
<<locked>>
61%
31981
79%
**98
96%
ReloadSwiss RS 14
<<locked>>
60%
14098
35%
**9
100%
[ReloadSwiss RS 30]*
<<locked>>
66%
19305
48%
**01
81%
[SNPE Vectan BA6 1/2]*
<<locked>>
61%
16607
41%
**2
87%
SNPE Vectan BA7 1/2
<<locked>>
61%
34360
85%
**99
100%
[Somchem S265]*
<<locked>>
61%
20885
51%
**4
80%
Vihtavuori 3N38
<<locked>>
61%
32576
80%
**52
100%
Vihtavuori N105
<<locked>>
61%
30661
75%
**32
100%
[Vihtavuori N110]*
<<locked>>
61%
20102
50%
**01
88%
Vihtavuori N32C Tin Star
<<locked>>
61%
26455
65%
**6
100%
[Winchester 296]*
<<locked>>
61%
25643
63%
**25
81%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page